大型軍事模型是如今很多軍事迷們會參與制作的項目，制作安裝完成后有時會在某個地方展示出來，供大家欣賞，但其中要注意的事項還是比較多的，那么大型軍事模型在展示時切忌做什么事？

　　Large military model is now a lot of military fans will participate in the production of the project, the production and installation of the completion of the sometimes displayed in a place for everyone to enjoy, but there are more matters to pay attention to, so large military model in the display of what should not do?

　　由于各種原因，一些展示空間有很多灰塵，應采取適當?shù)钠帘未胧?，減少灰塵落入大型軍事模型內部，灰塵對模型的影響主要是加速模型老化，影響展示效果。而且，整體清洗會對模型造成不同程度的損壞，從而導致模型受到不同程度的損壞，清潔次數越多，模型中許多組件的損壞就越大，要注意清潔的力度。此外，在展覽期間，許多孩子不可避免地會和父母一起來，孩子們對模型上的小部件很感興趣，在展示過程中要適當?shù)奶嵝?，以免孩子?duì)模型造成傷害。

　　Due to various reasons, there is a lot of dust in some exhibition Spaces, and appropriate shielding measures should be taken to reduce dust falling into the interior of large military models. The influence of dust on models is mainly to accelerate the aging of models and affect the display effect. In addition, the overall cleaning will cause different degrees of damage to the model, resulting in different degrees of damage to the model. The more cleaning times, the greater the damage of many components in the model. Attention should be paid to the cleaning strength. In addition, during the exhibition, many children will inevitably come with their parents. Children are interested in the small parts on the model, and proper reminders should be given during the display to avoid children causing harm to the model.

　　同樣重要的是展示空間的溫度和濕度不能太高，因?yàn)榇笮蛙娛履Ｐ蛢?nèi)部有很多微小的電子元件，運行時會散發出一些熱量。但由于內部空間小，有的燈泡只有幾毫米左右，會造成熱量過分集中，會造成材料變形或焊點脫落。室內濕度不宜過高，使模型內部的電子元件工作在潮濕的環境中，會大大降低電子元件的使用壽命。

　　It was also important that the temperature and humidity of the display space not be too high, because large military models have lots of tiny electronics inside them that emit some heat as they run. But because the internal space is small, some bulbs only a few millimeters or so, will cause excessive heat concentration, will cause material deformation or solder spot fall off. Indoor humidity should not be too high, so that the electronic components inside the model work in a humid environment, will greatly reduce the service life of electronic components.

　　此外，大型軍事模型內部電路及微電子元件較多，禁止在模型上形成流水。如果茶杯或飲料溢出，應立即用干毛巾或紙巾堵住水流，以防止面積擴大?；蛘呱钊肽Ｐ偷牡妆P，防止內部電子元件被燒毀或電線因進水而短路。如果模型上有大量水，應立即斷開電源。如果有大量水滲入或雨水，請等待模型完全干燥后再連接電源。

　　In addition, the large military model has many internal circuits and micro-electronic components, so it is forbidden to form water on the model. If a teacup or drink spills, stop the water with a dry towel or paper towel immediately to prevent the area from expanding. Or go deep into the chassis of the model to prevent the internal electronics from burning out or the wiring from being short-circuited by water. If there is a lot of water on the model, the power should be disconnected immediately. If there is a lot of water infiltration or rain, wait until the model is completely dry before connecting the power supply.

　　大型軍事模型說實在的話，它的制作過程是比較繁瑣且復雜的，所以完成后需要對其進行好好的維護才行，這樣才能讓模型的使用壽命得到延長，那么如果您還有什么問題的話就來網站m.maov.com.cn進行咨詢吧！

　　Large military model to be honest, its production process is quite tedious and complex, so it needs to be well maintained after completion, so that the service life of the model can be extended, so if you have any questions, please come to the website m.maov.com.cn for consultation!